Adding Storage Ports To A Storage Array; Unassigning A Storage Port From A Storage Array; Reassigning Mapped Storage Ports - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Adding storage ports to a storage array

To add storage ports to a storage array, complete the following steps.
1. Open the Storage Port Mapping dialog box by performing one of the following actions:
2. Select a storage port from the Storage Ports table.
3. Select the storage array to which you want to assign the storage port in the Storage Array list.
4. Click the right arrow.
5. Click OK to save your work and close the Storage Port Mapping dialog box.

Unassigning a storage port from a storage array

To unassign a storage port from a storage array, complete the following steps.
1. Open the Storage Port Mapping dialog box by performing one of the following actions:
2. Select the storage port you want to unassign from the Storage Array list.
3. Click the left arrow button.
4. Click OK to save your work and close the Storage Port Mapping dialog box.

Reassigning mapped storage ports

To reassign a storage port, complete the following steps.
1. To open the Storage Port Mapping dialog box, choose from one of the following approaches.
DCFM Enterprise User Manual
53-1001775-01
-
Select a storage port icon in the topology view, then select Discover > Storage Port
Mapping.
-
Right-click any storage port icon in the topology view and select Storage Port Mapping.
-
Right-click any storage port in the Device Tree and select Storage Port Mapping.
The Storage Port Mapping dialog box displays.
To select more than one port, hold down the CTRL key while selecting multiple storage ports.
The storage port is added to the Storage Array.
-
Select a storage port icon in the topology view, then select Discover > Storage Port
Mapping.
-
Right-click any storage port icon in the topology view and select Storage Port Mapping.
-
Right-click any storage port in the Device Tree and select Storage Port Mapping.
The Storage Port Mapping dialog box displays.
The selected storage port is removed from the Storage Array list and added to the Storage
Ports table.
-
Select a storage port icon in the topology view, then select Discover > Storage Port
Mapping.
-
Right-click any storage port icon in the topology view and select Storage Port Mapping.
-
Right-click any storage port in the Device Tree and select Storage Port Mapping.
The Storage Port Mapping dialog box displays.
Adding storage ports to a storage array
8
225