Renaming An Hba Host; Deleting An Hba Host; Viewing Host Properties - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

8

Renaming an HBA Host

Renaming an HBA Host
To rename a Host, complete the following steps.
1. Right-click an HBA icon and select Host Port Mapping.
2. Click the Host you want to rename in the Hosts table, wait a moment, and then click it again.
3. Type a new name for the Host.
4. Click OK to save your changes and close the Host Port Mapping dialog box.

Deleting an HBA Host

To delete a Host, complete the following steps.
1. Right-click an HBA icon and select Host Port Mapping.
2. Select the Host you want to delete in the Hosts table.
3. Click Delete.
4. Click OK to save your changes and close the Host Port Mapping dialog box.

Viewing Host properties

To view Host properties, complete the following steps.
1. Right-click an HBA icon and select Host Port Mapping.
2. Select the HBA Host port you want to view in the Hosts table.
3. Click Properties.
4. Click OK to close the Properties dialog box.
5. Click OK to close the Host Port Mapping dialog box.
202
The Host Port Mapping dialog box displays.
The Host displays in edit mode.
The name of the Host appears in the Hosts table in alphabetical order with the new name. To
assign HBAs to this Host, refer to
The Host Port Mapping dialog box displays.
The selected Host is deleted. Any HBAs associated with the Host are automatically moved from
the Host table to the HBAs table.
The Host Port Mapping dialog box displays.
The Properties dialog box for the selected port displays.
"Associating an HBA with a Host" on page 203.
DCFM Enterprise User Manual
53-1001775-01