Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 232

8
Device properties
TABLE 10
Field/Component
Member Ports
Model
Name
Node Name
Node WWN
Physical/Logical
Port Count
Port Type
Preshared key configured
Reason
Remote Switch Name
Remote Switch IP
Remote Switch WWN
Remote Slot #
Remote Master Port
Remote Member Ports
Sequence number
Serial #
Slot #
Source IP Address
Speed (Gb/s)
State
Status
Switch Name
Switch IP
Switch WWN
Tape Pipelining
Tunnel ID
Type
Unit Type
Vendor
# Virtual FCoE port count
VLAN #
VLAN Class of Service for Control
Connection
194
Device properties (Continued)
Description
The member ports of the trunk.
The model number of the device.
The user-defined name of the switch.
The name of the node.
The world wide name of the node.
Whether the device is a physical device or a logical device.
The number of ports.
The port type.
Whether the preshared key is configured for the FCIP tunnel.
The device status.
The remote switch name of the trunk.
The remote switch IP address of the trunk.
The remote switch world wide name of the trunk.
The remote slot number of the trunk.
The remote master port of the trunk.
The remote member port of the trunk.
The sequence number of the switch.
The hardware serial number.
The slot number of the trunk.
The IP address of the of the FCIP tunnel source device.
The speed of the port in gigabytes per second.
The device's state, for example, online or offline.
The operational status.
The switch name.
The switch IP address.
The switch world wide name.
Whether tape pipelining is On or Off for the FCIP tunnel.
The tunnel identifier.
The device type.
The unit type of the node.
The product vendor.
The number of virtual FCoE ports on the device. There is a one-to-one
mapping of TE ports to virtual FCoE ports. Therefore, the number of
virtual session ports is one for directly connected devices.
The VLAN number of the FCIP tunnel.
The VLAN class of service for the control connection of the FCIP tunnel.
DCFM Enterprise User Manual
53-1001775-01