Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 231

TABLE 10
Field/Component
Contributors
Device Type
Description
Destination IP Address
Discovery Status
Domain ID
Fabric
Fabric Name
Fabric Watch
Fastwrite
FC Port
FCoE Capable
FCS Role
Firmware
GigE Port
Host Name
IKE Policy #
IP Address
IPSec Policy #
L2 Capable
L3 Capable
L2 Mode
LAG ID
Last Discovery
Location
MAC address
Managed By
Master Port
DCFM Enterprise User Manual
53-1001775-01
Device properties (Continued)
Description
The device contributors.
Whether the device is an initiator or target.
A description of the customer site.
The IP address of the of the FCIP tunnel destination device.
The discovery status of the switch. Examples include 'Discovered: Seed
Switch' and 'Discovered: Not Reachable'.
The device's domain ID, which is the top-level addressing hierarchy of
the domain.
The fabric name.
The name specified through the device Element Manager.
Whether Fabric Watch is up or down.
Whether fastwrite is On or Off for the FCIP tunnel.
The FC port of the FCIP tunnel.
Whether the device is Fibre Channel over Ethernet capable.
Whether FCS is supported.
The firmware version.
The GigE port of the FCIP tunnel.
The Host name.
The IKE policy number. Also includes the following information:
•
•
•
•
The device's IP address.
The IPSec policy number. Also includes the following information:
•
•
•
Whether the device is Layer 2 capable.
Whether the device is Layer 3 capable.
The Layer 2 mode. Options include Access, Converged, or Trunk.
The link aggregation group identifier.
The date and time of the last discovery.
The customer site location.
In a network, the Media Access Control (MAC) address is a unique
number that identifies a specific hardware interface. It is a 12-digit
hexadecimal number.
The management program used to manage the fabric.
The master port of the trunk.
Authentication Algorithm
Encryption Algorithm
Diffie-Hellman
SA Life
Authentication Algorithm
Encryption Algorithm
SA Life
8
Device properties
193