Reverting To The Default Background Color - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

5

Reverting to the default background color

2. Select the Custom option and click Change.
FIGURE 60
3. Select or specify a color and preview it in the Preview pane.
4. Click OK to change the background color, or click Reset to return all settings to the color
5. Click OK on the Map Display Properties dialog box.
Reverting to the default background color
You can revert back to the default background color.
1. Right-click a group and select Map Display.
2. Select the Default option.
3. Click OK on the Map Display Properties dialog box.
130
The Choose a background color dialog box displays
Map Display dialog box
•
To pick a color from a swatch, select the Swatches tab. Select a color from the display.
•
To specify a color based on hue, saturation, and brightness, click the HSB tab. Specify
the hue (0 to 359 degrees), saturation (0 to 100%) and brightness (0 to 100%).
•
To specify a color based on values of red, green, and blue, click the RGB tab. Specify
the values for red, green, and blue (0 to 255).
currently being displayed on the topology.
The Map Display Properties dialog box displays.
(Figure 60).
DCFM Enterprise User Manual
53-1001775-01