Testing The Call Home Center Connection; Disabling A Call Home Center - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Supporting dcfm 10.4.x
Hide thumbs Also See for Brocade BladeSystem 4/24:
Table of Contents

Advertisement

4

Testing the call home center connection

Testing the call home center connection
Once you add and enable a call home center, you should verify that call home is functional.
To verify call home center functionality, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Click Edit Centers (beneath the Call Home Centers table).
3. Select the center you want to check in the Call Home Centers list.
4. Make sure that the Enabled check box is selected.
5. Click Send Test.
6. Click OK to close the 'Test Event Sent' message.
7.
8. Click OK to close the Call Home dialog box.

Disabling a call home center

When a call home center is disabled, no devices can send call home events to the call home center.
However, the devices and event filters assigned to the disabled call home center are not removed.
You can still perform the following actions on a disabled call home center:
To disable a call home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Clear the Enable check box of the call home center you want to disable in the Call Home
3. Click OK to confirm.
4. Click OK to close the Call Home dialog box.
116
The Configure Call Home Center dialog box displays.
NOTE
You must configure the call home center before you test the connection. To configure a call
home center, refer to
"Editing a call home center"
A faked event is generated and sent to the selected call home center. You must contact the call
home center to verify that the event was received and in the correct format.
Click OK to close the Configure Call Home Center dialog box.
Edit call home center configuration.
Add devices and event filters to the call home center.
The Call Home dialog box displays.
Centers table.
The selected call home center and its devices and event filters become grayed out. However,
the call home center is not actually disabled until you save your changes. When a device is
assigned to the call home center, a confirmation message displays.
on page 109.
DCFM Enterprise User Manual
53-1001775-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcfm enterprise

Table of Contents