Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 137

Configuring asset polling
Asset polling allows you set the length of time between state change polling. To maximize the
efficiency of the polling feature (balance the amount of possible information with any possible
performance impact), base your settings on the size of the SAN.
To configure asset polling, complete the following steps.
1. Select Server > Options.
2. Select Memory Allocation in the Category list to set the memory allocation for the server and
3. Enter how often you want to check for state changes in the Check for state change every field.
4. Enter how often you want to check for state changes in the If no state change, Poll switch every
5. Click Apply or OK to save your work.
6. Click OK on the "changes take effect after application restart" message.
DCFM Enterprise User Manual
53-1001775-01
The Options dialog box displays.
client.
You cannot enter a value lower than the default minimum value.
Default minimum values are as follows:
•
Small: 60 seconds
•
Medium: 120 seconds
•
Large: 180 seconds
field.
Default values are as follows:
•
Small: 120 seconds
•
Medium: 900 seconds
•
Large: 1800 seconds
NOTE
Changes to this option take effect after an application restart.
Memory allocation
3
99