Ip Configuration - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

IP Configuration

You can configure IP Configuration settings.
Configuring IP Configuration settings
NOTE
The server binds using IPv6 address by default if your Operating System is IPv6-enabled (dual mode
or IPv6 only). The server binds using IPv4 address by default if your Operating System is
IPv4-enabled. Servers running in dual mode allow the client to communicate from both IPv6 and
IPv4 addresses.
To configure the IP address used by the server for client-server communications, complete the
following steps.
1. Select Server > Options.
FIGURE 42
2. Select IP Configuration in the Category list to set the IP address.
DCFM Enterprise User Manual
53-1001775-01
The Options dialog box displays
Options dialog box (IP Configuration option)
(Figure 42).
3
IP Configuration
93