6. Select the Connection tab
FIGURE 35
DCFM Enterprise User Manual
53-1001775-01
information you want to display on flyover.
Options dialog box (Flyovers option, Connection tab)
a. Select the protocol from the Protocol list.
The default protocol is Fibre Channel. Depending on which protocol you select, some
properties may not be available for all protocols.
b. Select each property you want to display in the connection flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
Fibre Channel (default)
•
Name (port)
•
Address
•
Node WWN
•
Port WWN
•
Port#
•
Attached Port#
•
OS Device Name
•
Symbolic Name
•
IP Address
•
Max Frame Size (bytes)
•
Active FC4 Types
•
Supported FC4 Types
(Figure
35) and complete the following steps to select the
•
•
•
•
•
•
•
•
•
•
•
•
Flyovers
Speed Configured (Gbps)
Speed Supported (Gbps)
Class of Service
Operational State
Blocked Configuration
FC Address
Fabric
Port State
Port Type
Port Blocked Reason
Name
Device Type
3
75