6. Click OK on the SupportSave dialog box.
7.
Capturing Client support save data
To capture client support save files, complete the following steps.
1. Select Monitor > Technical Support > SupportSave.
2. Select the Client SupportSave check box to run supportsave on the client.
3. Make sure the Server SupportSave check box is clear.
4. Enter a file name for the client support save file in the File Name field.
5. Click OK on the SupportSave dialog box.
6. Click OK on the message.
Client support save using a command line interface
Use the following procedures to capture client support save files through the command line
interface (CLI).
Capturing client support save using the CLI (Windows)
To capture client support save files through the CLI, complete the following steps.
1. Go to User_Home/Management_Application_Name_Folder/Server IP.
2. Run the clientsupportsave.bat file.
3. Define a capture location by typing
4. Use an archive tool to create a ZIP file of the support save.
Capture client support save using the CLI (Linux)
To capture client support save files through the CLI, complete the following steps.
1. Go to /root /Management_Application_Name_Folder/Server IP.
2. Run the clientsupportsave.sh file.
Brocade Network Advisor SAN User Manual
53-1002167-01
Click OK on the message.
The application generates separate master logs to show the status of the Server Support save
collection.
The SupportSave dialog box displays.
The default file name is DCM-Client-SS-Time_Stamp.
The application generates separate master logs to show the status of the Client Support save
collection.
spaces, enclose it in double quotes.
By default, the capture location is
User_Home/Management_Application_Name_Folder/Server IP/support.
Server and client support save
<path> in the CLI. If the path has
clientsupportsave
31
913