Adding A Pseudo Event On The Resolving Policy - Brocade Communications Systems Brocade 8/12c User Manual

30
Pseudo events
13. Select the Management application user to whom the e-mail message will be sent from the
14. Add additional e-mail recipient addresses in the Other Recipients field. Separate multiple
15. If you want the e-mail message for the alert to display a description on the subject line, enter
16. If you want a prologue to be inserted at the beginning of the e-mail message, enter up to 255
17. If you want an epilogue to be placed at the end of the e-mail message, enter up to 255
18. Click Next to advance to the Summary pane.
19. Click Finish.
For more information about adding an event action, refer to

Adding a pseudo event on the resolving policy

When a down event occurs, a resolving policy waits for a specified duration to see if the events
remain in that state. If the event does remain in the Down state, a resolving pseudo event is
generated by the Event Processor.
The following two-part procedure uses both the Add Pseudo Events dialog box and the Add Event
Actions dialog box to create an event action with the resolving policy.
1. Select Monitor > Event Processing > Pseudo Events.
2. Click Add.
3. Enter a name and description for the pseudo event, and click the Enabled check box to enable
4. Click Next.
5. Click the Resolve button, and then enter the duration of time the Event Processor will wait
888
Available Recipients list, and click the right arrow button to move the recipient to the Selected
Recipients list.
NOTE
Make sure the user you select has an e-mail address defined in a user account.
e-mail addresses with a semicolon.
the text in the Subject Line field.
characters in the Body Prologue field. The event action message follows the prologue.
characters in the Body Epilogue field.
NOTE
NOTE: The prologue, the event action message, and the epilogue form the body of the e-mail
alert.
The Summary pane of the Edit Event Action dialog box displays an overview of the e-mail
configuration you are creating.
The Pseudo Events dialog box displays.
The Identification pane of the Add Pseudo Event dialog box displays.
the event.
The Policy pane of the Add Pseudo Event dialog box displays.
before generating the pseudo event. Specify the resolve time in minutes or hours.
"Event action definitions"
Brocade Network Advisor SAN User Manual
on page 867.
53-1002167-01