30
Event action definitions
5. Select one of the following event types from the Show list:
6. By default, all traps are listed in the Available Traps list, under the folders for the MIB to which
7.
8. If you selected Application Events in
9. If you selected Pseudo Events in
10. If you selected Custom Events in
868
FIGURE 385
Add Events dialog box - Events pane
•
Traps (default)
•
Application Events
•
Pseudo Events
•
Custom Events
Depending on what event type you select, a box listing the available events or pseudo events
displays.
they belong. You can limit the list by doing any of the following:
•
Click one of the following buttons:
MIB Information, if you want the default SNMP name for the traps to be displayed.
MIB Alias, if you want the aliases for the traps to be displayed.
•
Use the Trap Filter tool to limit the trap list to the trap severities you want. To use this tool,
click the Filter button to display the Trap Filters dialog box.
After limiting the list of available traps, expand the MIB folder to which the trap you want
belongs under the Available Traps list and select that trap. Click the right arrow button to move
it to the Selected Traps list.
use the arrow buttons to move them to the right.
that you want to include in the definition, then click the right arrow button to move it to the
Selected Pseudo Events list.
Event Category, Severity, Message ID, and Description Contains, as required.
step
5, select the application events in the left table and
step
5, select one or more of the pseudo events you created
step
5, click Next to accept the defaults; otherwise, select the
Brocade Network Advisor SAN User Manual
53-1002167-01