Frame Monitoring Requirements; Creating A Custom Frame Monitor - Brocade Communications Systems Brocade 8/12c User Manual

Frame Monitoring requirements

To configure Frame Monitoring, the following requirements must be met:
•
•
NOTE
The Advanced Performance Monitoring license is required to configure frame monitors. The
monitoring functionality requires the Fabric Watch license.
The maximum number of frame monitors and offsets per port is platform-specific. Refer to the
Fabric OS Administrator's Guide for more information.

Creating a custom frame monitor

Pre-defined frame monitors are already installed on switches that support Frame Monitoring. Use
this procedure if you want to create a custom frame monitor.
1. Select Monitor > Fabric Watch > Frame Monitor.
FIGURE 359
Brocade Network Advisor IP User Manual
53-1002168-01
The switch must be running Fabric OS 7.0.0 or later.
Frame Monitoring requires the Advanced Performance Monitoring license and the Fabric
Watch license.
The Frame Monitor dialog box displays
Frame Monitor dialog box
Creating a custom frame monitor
(Figure 359).
28
817