Saving A Historical Performance Graph Configuration - Brocade Communications Systems Brocade 8/12c User Manual

Saving a historical performance graph configuration

To save a historical performance graph configuration, complete the following steps.
1. Select the device for which you want to generate a performance graph.
2. Choose one of the following options:
3. Filter the historical data by completing the following steps.
4. Select the number of results to display from the Display list.
5. Select the ports from which you want to gather performance data from the From list.
6. Select the historical period for which you want to gather performance data from the For list.
7.
8. Select the measure by which you want to gather performance data from the Measures list.
9. Enter a reference line value percentage for Tx% or Rx % Utilization.
10. Move the Row Height slider to the left to make the row height smaller or to the right to make it
11. Select the Display tabular data only check box to only show text with no graphs or icons.
12. Save this configuration by selecting Save.
13. Enter a name for the configuration in the Favorites Name field.
14. Click OK.
15. Click Apply.
16. Click the close button (X) to close the HIstorical Performance Graph dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
•
Select Monitor > Performance > Historical Graph.
OR
•
Right-click the device or fabric and select Performance > Historical Graph.
The Historical Performance Graph dialog box displays.
NOTE
Devices with 10GE ports must be running Fabric OS 6.4.1ltd or later to obtain the correct
TE port statistics (TX/RX).
If you select Custom, you can save the selected ports as a Favorite.
If you select Custom, you can save the selected time as a Favorite.
Select the granularity at which you want to gather performance data from the Granularity list.
To select more than one measure, click the Additional Measures expand arrows and select the
check box for each additional measure.
This field is only enabled when Tx% or Rx % Utilization is selected from the Measures list.
bigger.
The Source and Destination icons and the Graph column do not display
The Save Favorites dialog box displays. This enables you to save the selected configuration so
that you can use it to generate the same type of report at a later date.
The selected graph automatically displays in the Historical Performance Graph dialog box.
SAN Historical performance data
27
791