Troubleshooting Device Connectivity - Brocade Communications Systems Brocade 8/12c User Manual

Brocade network advisor san user manual v11.1x (53-1002167-01, may 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

4. Click the right arrow button.
5. Click OK.
6. Click Close on the Trace Route Summary dialog box.
7.

Troubleshooting device connectivity

To troubleshoot device connectivity, complete the following steps.
1. Select Configure > FC Troubleshooting > Device Connectivity.
2. Select the source and destination ports on which you want to troubleshoot device connectivity
Brocade Network Advisor SAN User Manual
53-1002167-01
The Trace Route Summary dialog box displays. This dialog box includes the following
information:
Trace Route Summary. This table shows a brief summary of the trace including the
following:
Port WWN
Port name
FC address
Switch name
(Fabric OS only) Whether ping was successful (Fabric OS only)
(Fabric OS only) Round trip time (minimum, maximum, and average)
(Fabric OS only) Whether the device ports are in active zones.
Forward Route. This tab shows the path taken by data packets from the port belonging to
the switch on which the trace route has been invoked (source port) to the port on the other
switch (destination port).
(Fabric OS only) Reverse Route. This tab shows the path from the destination port to the
source port.
NOTE
This reverse route may sometimes be different from the forward route.
(Fabric OS only) FC Ping. This tab shows the minimum, maximum and average round trip
times between the selected device port WWNs and the domain controller. It details
whether the selected device port WWNs are zoned or not. It also shows the number of
frames sent to the device port, frames rejected, frames timed-out and frames received by
the device port.
Click Cancel on the Trace Route dialog box.
The Device Connectivity Troubleshooting dialog box displays.
using one of the following options:
Enter the source and destination ports directly by selecting the Enter port FC Address
option and completing the following steps.
a. Enter the source port in the Source field.
b. Enter the destination port in the Destination field.
c.
Click Search and Add.
26
FC troubleshooting
751

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 11.1.xBrocade bladesystem 4/24

Table of Contents