Modifying Port Vlan Properties - Brocade Communications Systems Brocade 8/12c User Manual

Brocade network advisor san user manual v11.1x (53-1002167-01, may 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

6. Click OK to save the changes.

Modifying port VLAN properties

Complete the following steps to modify port VLANs using the VLAN View tab or the Product View tab
on the Edit VLAN dialog box.
1. On the VLAN Manager dialog box, click the VLAN View or Product View tab.
2. If in the VLAN view, select and expand a VLAN entry or if in the Product view, select and expand
3. Modify the following information for IOS products:
4. Click OK to save the changes.
Brocade Network Advisor SAN User Manual
53-1002167-01
If you want to add a virtual routing interface to the VLAN, enter the virtual routing interface
number in this parameter. You can add an IP address to the virtual routing interface once
the VLAN is deployed. From the Product View tab, you can configure one virtual routing
interface per VLAN, for each product. From the VLAN View tab, you can edit virtual routing
interfaces on multiple products for a specific VLAN.
NOTE
The Router Interface field is editable for products that support routing and have router
image of the firmware installed.
a product and click the Edit button.
The Edit VLAN dialog box, Ports tab displays.
Name—Displays the name of the VLAN (not editable).
QoS—Select a QoS level from the list.
Select either Normal or High as the QoS level for Brocade IP stackable products.
Select Low (None or 0) through High (7) for NetIron CES products. Select None for
NetIron CER and NetIron CES products if the product does not have VLAN priority
configured (None applies only to NetIron CER and NetIron CES products).
Select Low (0) through High (7) for all other Brocade IP products.
Router Interface
If you want to add a virtual routing interface to the VLAN, enter the virtual routing interface
number in this parameter. You can add an IP address to the virtual routing interface once
the VLAN is deployed. From the Product View tab, you can configure one virtual routing
interface per VLAN, for each product. From the VLAN View tab, you can edit virtual routing
interfaces on multiple products for a specific VLAN.
NOTE
The Router Interface field is editable for products that support routing and have router
image of the firmware installed.
24
Port VLANs
733

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 11.1.xBrocade bladesystem 4/24

Table of Contents