22
Adding thresholds
Editing a State Change threshold
NOTE
This threshold is only available for Fabric OS devices running 6.3 or later.
To edit an State Change threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select State Change (Fabric OS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
4. Change the name for the threshold in the Name field, if necessary.
5. Select one of the following options:
700
The Port Fencing dialog box displays
FIGURE 322
Port Fencing dialog box
The Edit State Change Threshold dialog box displays.
FIGURE 323
Edit State Change Threshold dialog box
•
Default—Uses device defaults. Go to
•
Custom—Uses your selections. Continue with
(Figure
307).
step
8.
step
6.
Brocade Network Advisor IP User Manual
53-1002168-01