Brocade Communications Systems Brocade 8/12c User Manual page 735

2. Select State Change (Fabric OS only) from the Violation Type list.
3. Click Add.
4. Enter a name for the threshold in the Name field.
5. Select one of the following options:
6. Enter the number of state changes allowed for the threshold in the Threshold errors field.
7.
8. Click OK to add the state changes threshold to the table and close the Add State Change
9. Click OK on the Port Fencing dialog box.
Brocade Network Advisor IP User Manual
53-1002168-01
The Add State Change Threshold dialog box displays.
•
Default—Uses device defaults. Go to
•
Custom—Uses your selections. Continue with
Select the time period for the threshold from the errors per list. The following choices are
available:
•
None—the port is blocked as soon as the specified number of state changes allowed is
met.
•
Second—the port is blocked as soon as the specified number of state changes allowed is
reached within a second.
•
Minute—the port is blocked as soon as the specified number of state changes allowed is
reached within a minute.
•
Hour—the port is blocked as soon as the specified number of state changes allowed is
reached within a hour.
•
Day—the port is blocked as soon as the specified number of state changes allowed is
reached within a day.
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 693.
Adding thresholds
step 8.
step 6.
22
"Assigning thresholds" on
691