General Tab - Brocade Communications Systems Brocade 8/12c User Manual

18
Viewing and editing group properties

General tab

The General tab
the General tab, select a group from the Encryption Center Devices table, then select Group >
Properties from the menu task bar, or right-click a group and select Properties.
NOTE
You can also select a group from the Encryption Center Devices table, then click the Properties icon.
FIGURE 269
The General tab displays the following properties:
•
•
•
•
•
•
•
•
•
566
(Figure 269) is viewed from the Encryption Group Properties dialog box. To access
Encryption Group Properties dialog box - General tab
Encryption group name - the name of the encryption group.
Group status - the status of the encryption group, which can be OK-Converged or Degraded.
Degraded means the group leader cannot contact all of the configured group members.
Deployment mode - the group's deployment mode, which is transparent.
Failback mode - The group's failback mode, which can be automatic or manual. The failback
mode can be changed by clicking on the field and selecting the desired mode.
Key vault - the vault type, either RSA Key Manager (RKM) NetApp Lifetime Key Manager (LKM),
HP Secure Key Manager (SKM), Thales Encryption Manager for Storage (TEMS), or Tivoli Key
Lifetime Manager (TKLM).
REPL Support - whether or not remote replication LUNs support is enabled or disabled. You can
change the current setting by clicking on the field and selecting the desired state.
Primary Key Vault IP address - The IP address of the primary key vault, either IPv4 or host
name.
Primary Key Vault Connection Status - the status of the connection to the primary key vault. In
an operating environment, the status should be Connected.
Backup key vault IP address - the IP address of the backup key vault.
Brocade Network Advisor SAN User Manual
53-1002167-01