Viewing and editing group properties
To view encryption group properties, complete the following steps.
1. Select Configure > Encryption from the menu task bar.
2. Select a group from the Encryption Center Devices table, then select Group > Properties from
FIGURE 268
Brocade Network Advisor SAN User Manual
53-1002167-01
The Encryption Center dialog box displays
the menu task bar, or right-click a group and select Properties.
NOTE
If groups are not visible in the Encryption Center Devices table, select View > Groups from the
menu task bar.
The Encryption Group Properties dialog box displays
Encryption Group Properties dialog box
The dialog box includes the following tabs:
•
"General tab"
on page 566
•
"Members tab"
on page 567
•
"Security tab"
on page 569
•
"HA Clusters tab"
on page 571
•
"Engine Operations tab"
•
"Link Keys tab"
on page 571
•
"Tape Pools tab"
on page 572
NOTE
The Link Keys tab appears only if the key vault type is NetApp LKM.
Viewing and editing group properties
(Figure
153).
(Figure
on page 575
268).
18
565