Viewing and editing switch encryption properties
To view switch encryption properties, complete the following steps:
1. Select Configure > Encryption from the menu task bar.
2. Select a switch or encryption engine from the Encryption Center Devices table, then select
FIGURE 266
•
•
•
Brocade Network Advisor SAN User Manual
53-1002167-01
The Encryption Center dialog box displays
encryption-related hardware and functions at a glance. It is the single launching point for all
encryption-related configuration.
Switch/Engine > Properties from the menu task bar, or right-click a switch or encryption engine
and select Properties.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Properties dialog box displays
Encryption Properties dialog box
The dialog box contains the following information:
Switch Properties table - the properties associated with the selected switch.
Name - the name of the selected switch.
Node WWN - the world wide name of the node.
Viewing and editing switch encryption properties
(Figure
153). The dialog box shows the status of all
(Figure
266).
18
561