Creating A Client On Tems - Brocade Communications Systems Brocade 8/12c User Manual

18
Steps for connecting to a TEMS appliance

Creating a client on TEMS

This step assumes the group brocade has been created by an administrator. If the group brocade
does not exist, you must log in to TEMS as officer, create the group, and assign the group to a
manager.
1. From the Encryption Center Devices table, select a switch that needs to have a TEMS Client.
2. Select Properties.
3. Click Key Vault User Name.
FIGURE 170
4. Copy the user name in the User Name field.
5. Log in to the Thales management program as a manager who has been assigned to the
6. Select the Clients tab
FIGURE 171
7.
8. Enter the user name from
466
The Key Vault User Information dialog box displays
TEMS Key Vault User Information
brocade group.
(Figure
TEMS Clients tab
Click the Add Client tab.
(Figure
171).
step 4 in the Name field.
170).
Brocade Network Advisor SAN User Manual
53-1002167-01