Adding An Fcoe Login Group - Brocade Communications Systems Brocade 8/12c User Manual

Adding an FCoE login group

Complete the following steps to add switches to a login group. You can manually add ports by
entering the world wide name (WWN) or select available managed CNAs from all discovered hosts.
Only directly-connected devices are supported.
1. Select Configure > FCoE from the menu bar.
2. Click Add.
3. Select an existing switch from the Switch list, or enter the WWN of the switch that will be added
4. Select one of the following Login Members options:
5. Select one of the following Available Member options:
6. Select available members from the Products/Ports list and click the right arrow button to move
Brocade Network Advisor SAN User Manual
53-1002167-01
or
Right-click the DCB device and select FCoE.
The Add Login Group dialog box, shown in
FIGURE 140 Add Login Group dialog box
to the FCoE login group.
•
Allow all—Click to allow all login members into the Available Members list.
•
Allow specific—Click to allow specific login members into the Available Members list. If you
select this option, you can add specific login members using the options in the Available
Members area.
•
Port WWN—Click to enter the world wide name (WWN) of the port to associate with the
selected switch. The member port WWN text field allows a maximum of 16 digits.
•
Managed CNAs—Click to show a list of products and ports which can be selected as login
group members.
the available members to the Selected Members list.
FCoE login groups
Figure 140, displays.
14
381