Vlan Classifier Configuration; Adding A Vlan Classifier Rule - Brocade Communications Systems Brocade 8/12c User Manual

14

VLAN classifier configuration

VLAN classifier configuration

The Management application supports VLAN classifier management only on Fabric OS (FOS)
version 6.3.1_dcb and FOS 7.0.0.
VLAN classifier rules are used to define specific rules for classifying untagged packets to selected
VLANs based on protocol and MAC addresses. The classified frames are then tagged with a VLAN
ID.
VLAN classifier rules can be categorized into the following areas:
•
•
VLAN classifiers are created on per-switch basis. The VLAN Classifiers tab of the Edit Switch dialog
box allows you to create rules and group them into VLAN classifiers, which can then be applied to
access port and LAG VLAN members and converged port VLAN members.
NOTE
The VLAN Classifiers tab on the Edit Switch dialog box displays only on switches with Fabric OS (FOS)
versions 7.0.0 and later.

Adding a VLAN classifier rule

1. Select Configure > DCB from the menu bar.
2. Select a switch and click Edit.
3. Click the VLAN Classifiers tab on the Edit Switch dialog box.
362
802.1Q protocol-based classifier rules
MAC address-based classifier rules
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The Edit Switch dialog box, VLAN Classifiers tab displays, as shown in Figure 129.
Brocade Network Advisor SAN User Manual
53-1002167-01