Brocade Communications Systems Brocade 8/12c User Manual page 362

13
Adapter software
Downloading a boot image to a selected host
To download boot images to a selected host, perform the following tasks.
1. Select one or more hosts from the Available Hosts list on the Boot Image Management dialog
2. Click Select Latest to make sure the lastest imported boot images display in the Boot Image to
3. From the Boot Image Management dialog box, click the Download button.
Deleting a boot image from the repository
1. Select one or more boot images from the Boot Image File Name list on the Boot Image
2. Click Delete.
Backing up boot image files
You can back up the boot image files from the repository using the Options dialog box. Refer to
"Backup support"
318
box, and click the right arrow button to move the selected hosts to the Selected Hosts list.
You can select up to 50 hosts. The first 20 hosts execute the download concurrently. If you
select more than 20 hosts, they will be queued and will start when the previous download
completes.
NOTE
The driver version of the host must be 2.0.0.0 or higher.
Download list for hosts corresponding to driver installed.
One of the following download status messages displays in the Status column of the Selected
Hosts list:
•
Ready
•
Queued
•
In progress
•
Failed—If the download failed, the failure reason displays in the Message column of the
Selected Hosts list; for example, failed to connect to HCM agent, a checksum error
occurred, or the file is invalid.
•
Finished
Repository dialog box.
The boot image is removed from the boot image repository.
on page 324 for instructions.
Brocade Network Advisor SAN User Manual
53-1002167-01