Brocade Communications Systems Brocade 8/12c User Manual page 263

6. Select the authentication policy (PAP or CHAP) from the Authentication Type field.
7.
8. Enter the timeout timer value (in seconds) that specifies the amount of time to wait between
9. Enter the number of attempts to be made to reach a server before assuming it is unreachable
10. Click OK to return to the AAA Settings tab.
11. If you have established an active connection with the Radius server, click Test.
12. Set secondary authentication by selecting one of the following options from the Secondary
13. Set the fall back condition to secondary authentication by selecting one of the following
14. Set the authorization preference by selecting one of the following options from the
15. Click Apply to save the configuration.
Brocade Network Advisor SAN User Manual
53-1002167-01
Default is CHAP.
Enter the shared secret in the Shared Secret and Confirm Secret fields.
retries when the server is busy in the Timeout (Sec) field.
Default is 3 seconds.
in the Attempts field.
Default is 3 attempts.
Test attempts to contact the Radius server by issuing a ping command.
Authentication list:
•
Local Database
•
None
options from the Switch to secondary authentication when list:
•
Radius Servers Not Reachable
•
Radius Authentication Failed
Authorization Preference list:
•
Local Database
•
Primary Authentication Server
9
AAA Settings
219