Changing The Port Label; Changing The Port Display - Brocade Communications Systems Brocade 8/12c User Manual

7

Changing the port label

Changing the port label

To change the port label, complete the following steps.
1. Select a port in the Connectivity Map or Product List.
2. Select View > Port Label, and select one of the following options:

Changing the port display

You have the option of viewing connected (or occupied) product ports, unoccupied product ports, or
attached ports.
NOTE
Connected (or occupied) ports are those that originate from a device, such as a switch. Attached
ports are ports of the target devices that are connected to the originating device.
1. Select View > Port Display, and select one of the following options:
2. Repeat step 1 to select more than one port display option.
184
•
Name. Displays the name as the port label.
•
Port Number. Displays the port number as the port label.
•
Port Address. Displays the port address as the port label.
•
Port WWN. Displays the port world wide name as the port label.
•
User Port #. Displays the user's port number as the port label.
•
Slot/Port. Displays the slot and port as the port label.
•
Zone Alias. Displays the zone alias as the port label.
All port labels within the fabric to which the selected item belongs change to the selected port
label type.
•
Occupied Product Ports. Select to display the ports of the devices in the fabrics (present in
the Connectivity Map) that are connected to other devices.
•
Unoccupied Product Ports. Select to display the ports of the devices (shown in the
Connectivity Map) that are not connected to any other device.
•
Attached Ports. Select to display the attached ports of the target devices.
•
Switch to Switch Connections. Select to display the connections between devices. Switc- t-
switch connections only display when the Attached Ports option is also selected.
Brocade Network Advisor SAN User Manual
53-1002167-01