Removing An Event Filter From A Device; Removing An Event Filter From The Call Home Event Filters Table; Searching For An Assigned Event Filter - Brocade Communications Systems Brocade 8/12c User Manual

6

Removing an event filter from a device

Removing an event filter from a device

To remove an event filter from a device, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Choose one of the following options in the Call Home Centers table:
3. Click OK to close the Call Home dialog box.

Removing an event filter from the Call Home Event Filters table

1. Select Monitor > Event Notification > Call Home.
2. Select the event filter you want to remove in the Call Home Event Filters table.
3. Click Remove.
4. Click OK to close the Call Home dialog box.

Searching for an assigned Event Filter

To find all devices to which an event filter is assigned, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Select the event filter you want to find in the Call Home Event Filters table.
3. Click > (find button).
4. All instances of the event filter are highlighted in the Call Home Centers table.
174
The Call Home dialog box displays.
•
Right-click an event filter assigned to a device and select Remove Filter.
•
Right-click a device to which the event filter is assigned and select Remove Filter.
•
Select an event filter assigned to a device and click the left arrow button. Press CTRL and
click to select multiple event filters assigned to multiple devices.
All event filters assigned to the device are removed.
The Call Home dialog box displays.
•
If the event filter is not assigned to any devices, a confirmation message displays asking if
you want to remove the event filter. Click Yes.
•
If the event filter is assigned to any devices, a confirmation message displays informing
you that removing this event filter will remove it from all associated devices. Click Yes.
The event filter is removed from any associated devices and the Call Home Event Filters
table.
To determine to which devices the event filter is assigned, select the event filter and then
click the find button (>).
The Call Home dialog box displays.
If the selected event filter is not assigned to any devices in the Call Home Centers table, a not
found message displays.
Brocade Network Advisor SAN User Manual
53-1002167-01