Changing The Backup Interval; Starting Immediate Backup - Brocade Communications Systems Brocade 8/12c User Manual

4
Server Data backup

Changing the backup interval

When the backup feature is enabled, your SAN is protected by automatic backups. The backups
occur every 24 hours by default. However, you can change the interval at which backup occurs.
ATTENTION
Do NOT modify the backup.properties file.
To change the backup interval, complete the following steps.
1. Select Server > Options.
2. Select Server Backup in the Category list.
3. Select an interval from the Backup Interval drop-down list to set how often backup occurs.
4. Click Apply or OK.

Starting immediate backup

NOTE
You must have backup privileges to use the Backup Now function.
To start the backup process immediately, complete one of the following procedures:
Using the Backup Icon, right-click the Backup icon and select Backup Now.
OR
1. Select Server > Options.
2. Select Server Backup in the Category list.
3. Click Backup Now.
4. Click Apply or OK.
88
The Options dialog box displays.
The minimum value is 6 hours and the maximum value is 24 hours.
The Options dialog box displays.
The backup process begins immediately. There is no confirmation message.
Brocade Network Advisor SAN User Manual
53-1002167-01