Sensorshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

sensorShow

Displays sensor readings.
SYNOPSIS
sensorshow
DESCRIPTION
Use this command to display the current temperature, fan, and power supply status and readings from
sensors located on the switch. The actual location of the sensors varies, depending on the switch type.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To view all sensor values:
SEE ALSO
fanShow,
Fabric OS Command Reference
53-1001764-01
switch:admin> sensorshow
sensor 1: (Temperature) is Ok, value is 39 C
sensor 2: (Temperature) is Absent
sensor 3: (Temperature) is Absent
sensor 4: (Temperature) is Absent
sensor 5: (Temperature) is Ok, value is 26 C
sensor 6: (Temperature) is Ok, value is 27 C
sensor 7: (Fan
sensor 8: (Fan
sensor 9: (Fan
sensor 10: (Power Supply ) is Ok
sensor 11: (Power Supply ) is Absent
sensor 12: (Power Supply ) is Ok
sensor 13: (Power Supply ) is Absent
tempShow
) is Ok, speed is 2537 RPM
) is Ok, speed is 2537 RPM
) is Ok, speed is 2556 RPM
22
sensorShow
903