22
portTestShow
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
-ports itemlist
EXAMPLES
To display information from portTest:
SEE ALSO
portLoopbackTest, portTest, spinFab,
838
Displays test results for the specified ports. This operand is optional; if omitted,
data for all ports are displayed. Refer to the itemList help page for further details.
switch:admin> porttestshow 1
Port 1 : PASS
PortType: OTHER
PortInternalState: INIT
Pattern: 0x0
Seed: 0x0
TotalIteration: 0
TotalFail: 0
StartTime: NONE
StopTime:
NONE
Timeout: 0
PortState: NO TEST
PortTypeToTest: NO_TEST
UserDelay: 0
CurrentIteration: 0
ConsecutiveFail: 0
ErrorCode: 0
stopPortTest
Fabric OS Command Reference
53-1001764-01