Brocade Communications Systems Brocade 8/12c Command Reference Manual page 812

22
portShow
778
-it
Displays data at the Initiator Target (SID/DID) FCP level.
-itn
Displays data at the Initiator Target nexus (SID/DID) level.
-itl
Displays data at the Initiator Target LUN (SID/DID/LUN) level.
-twb
Displays data at the Exchange (SID/DID/LUN/Exchange) level.
command
Specifies the type of information to be displayed. This operand is optional; if
omitted, the default (-stats) is used. You can specify more than one
command option. Valid commands include the following:
-stats
Displays FCP emulation statistics. This is the default display.
-info
Displays general FCP emulation information.
-cfg
Displays the FCP emulation configuration.
-dump
Displays a raw data dump including data for all information types.
param
Limits output to one or more of the following parameters, given the
commands and levels specified with this command. This operand is optional;
if omitted, output for all parameters is displayed. There is no default
parameter.
-sid SID
Displays output for the specified SID only.
-did DID
Displays output for the specified DID only.
-lun LUN
Displays output for the specified LUN only.
-timer
Displays timer information only.
options
Affects all levels and commands globally. Only one option is supported.
-zero
Displays zero-valued statistics. Note that some commands may show
zero-valued information regardless of whether or not this option is specified.
-ficon
Displays sub-menu for FICON emulation display commands when issued with a
VE_Port number. The syntax for -ficon is as follows:
portshow xtun [slot/]ve_port -ficon [command] [options]
The following optional commands are supported with -ficon; if omitted, the usage
for all parameters is displayed. The xtun -ficon command options include
displays for all types of FICON Emulation.
-help
Displays the command usage. You must specify a VE_Port number to display
the help functions, for example, portshow xtun 7/12 -ficon -help.
Fabric OS Command Reference
53-1001764-01