Brocade Communications Systems Brocade 8/12c Command Reference Manual page 69

To remove the port group with pgid 2:
To enable managed fabric name monitoring in port group 3:
To disable managed fabric name monitoring in port group 3:
To get the current fabric name monitoring timeout value:
To set the fabric name monitoring timeout value to 30 seconds:
AG Preferred port information commands
To display preferred port settings for F_Ports:
Fabric OS Command Reference
53-1001764-01
switch:admin> ag --pgremove 2
Port Group 2 has been removed successfully
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode
-----------------------------------------------
0 pg0 lb,mfnm
3 FirstFabric lb
-----------------------------------------------
switch:admin> ag --pgsetmodes 3 "mfnm"
Managed Fabric Name Monitoring mode has been \
enabled for Port Group 3
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode
-----------------------------------------------
0 pg0 lb,mfnm
3 FirstFabric lb,mfnm
-----------------------------------------------
switch:admin> ag --pgdelmodes 3 "mfnm"
Managed Fabric Name Monitoring mode has been disabled for Port Group 3
switch:admin> ag --pgshow
-----------------------------------------------
0 pg0 lb,mfnm
3 FirstFabric lb
-----------------------------------------------
switch:admin> ag --pgfnmtov
Fabric Name Monitoring TOV: 120 seconds
switch:admin> ag --pgfnmtov 30
switch:admin> ag --prefshow
F_Ports
------------------------------------------
10;11
12;13
4;6
7;8;9
------------------------------------------
N_Ports F_Ports
0;2 4;5;6
1;3 10;11
N_Ports F_Ports
0;2 4;5;6
1;3 10;11
0;2 4;5;6
1;3 10;11
Preferred N_Port
0
1
2
3
22
ag
35