Brocade Communications Systems Brocade 8/12c Command Reference Manual page 681

-i mode
EXAMPLES
To set the fabric ID of port 2/1 to 5 and the port ID format to core:
To configure port 2/0 to be an EX_Port and set the fabric ID to 4:
To disable fabric parameter negotiation on port 2/0 of an EX_Port:
To enable IDID on port 2:
To display EX_Port settings configured for Mi10K connectivity:
SEE ALSO
portCfgVEXPort, portDisable, portEnable, portShow, portCfgDefault,
Fabric OS Command Reference
53-1001764-01
1
McDATA Open Fabric mode.
2
McDATA Fabric mode.
3
MCDATA fabric legacy mode.
Enables or disables Insistent Domain Id (IDID) for the specified EX_Port. Specify
1 to enable IDID, specify 2 to disable IDID. This command must be issued from a
McDATA edge switch attached to a single or dual FCR configuration.
switch:admin> portcfgexport 2/1 -f 5 -p 1
switch:admin> portcfgexport 2/0 -a 1 -f 4
switch:admin> portcfgexport 2/0 -t 2
switch:admin> portcfgexport 2 -i 1
switch:admin> portcfgexport 10
Port 10 info
Admin:
State:
Pid format:
Operate mode:
Edge Fabric ID:
Preferred Domain ID:
Front WWN:
Fabric Parameters:
R_A_TOV:
E_D_TOV:
Authentication Type: None
DH Group: N/A
Hash Algorithm: N/A
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
enabled
OK
Not Applicable
Open
70
239 mode
50:00:51:e3:76:0e:4e:46
Auto Negotiate
Not Applicable
Not Applicable
22
portCfgEXPort
fcrBcastConfig
647