Iodreset - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

iodReset

iodReset
Disables in-order delivery (IOD) on a switch.
SYNOPSIS
iodreset
DESCRIPTION
Use this command to disable in-order delivery enforcement on the local switch. IOD is disabled by
default, and can only be disabled after it has been enabled with the iodSet command. This command
disables the legacy IOD enforcement only.
Disabling IOD allows faster rerouting after a fabric topology change, but it may cause out-of-order
delivery of frames during fabric topology changes.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To disable IOD enforcement:
SEE ALSO
iodSet,
436
switch:admin> iodreset
IOD is not set
iodShow
Fabric OS Command Reference
53-1001764-01