Brocade Communications Systems Brocade 8/12c Command Reference Manual page 381

Time Stamp
Type
Type Number
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
database
fabric
EXAMPLES
To display the local RNID database:
Fabric OS Command Reference
53-1001764-01
Displays the timestamp, expressed in date format.
Same as Port Type.
Displays the type number of the self-describing node. It also describes the
machine type.
Specify the database to display. This operand is required. Valid values include the
following
RNID
Device node identification.
LIRR
Devices registered to receive link incident reports. Entries can have the following
flags:
-C*
A user-configured LIRR entry defined as current (set with the ficonCfg
command).
-C
A LIRR entry defined by the management server demon as current based on
order.
-S
A LIRR entry defined by the management server demon as secondary.
SwitchRNID
Switch node identification.
RLIR
Link incident reports.
ILIR
Implicit link incident reports.
Displays FICON database information for the entire fabric. This operand is
optional; if omitted, only local members of the named database are displayed.
switch:admin> ficonshow RNID
{
{Fmt Type PID Registered Port WWN
0x18 N 502b00 50:05:07:64:01:00:15:8d 50:05:07:64:00:c1:69:ca \
flag Parm
0x10 0x200110
Type number:
Model number:
Manufacturer:
Plant of Manufacture: 02
Sequence Number:
Registered
002064
101
IBM
0000000169CA
ficonShow
Node WWN \
22
347