Deprecated Commands; Port Mirroring - Brocade Communications Systems Brocade 8/12c Command Reference Manual

•
•

Port Mirroring

Port mirroring is not supported over FCIP links (VE tunnels) or for Condor 3 FC ports that have
Encryption or Compression enabled.
•
•
Security
•
•
•
•
•
SNMP
•
•
TI- Zones - enhanced error detection
New option to zone command generates a report of potential routing problems in the local Domain.
zone --showTIerror

DEPRECATED COMMANDS

Information that was removed or deprecated since this document was last released:
•
•
•
•
Fabric OS Command Reference
53-1002147-01
-
portCfgAutoDisable --remove - Remove specified triggers.
-
portCfgAutoDisable --addall - Add all triggers.
-
portCfgAutoDisable --removeall - Remove all triggers.
-
portCfgAutoDisable--addexcept - Add all triggers except provided options.
-
portCfgAutoDisable --show - Show configured/added options.
portCfgShow - displays the configured values .
portCfgDefault - Enhanced to reset port auto disable flag to a disabled state.
portMirror
portCfg mirrorport
Ipfilter New enhancements:
-
ipfilter --clrcounters
-
ipfilter --showcounters
-
Permit and deny actions are not allowed on ports 1024. and above.
aaaConfig - New -nologout option protects existing sessions from termination when changing
protocols.
secPolicyCreate - DCC Policy lockdown does not work in switch disabled state.
secStatsShow - - Updated list of valid security policies.
sshUtil - Modified to generate authentication keys for a specified use
snmpConfig enhancements:
-
Support for new SW traps: swStateChange, swMovePort, and swBrcdGenericTrap
-
Ability to blocks or unblocks access to SNMPv1 snmpConfig --enable | --disable snmpv1
snmpTraps - Enhanced to block a port from receiving traps.
-
snmptraps --block | --unblock -port [slot]port | ALL
cfgSaveActiveToDefined
cfgMcdtMode
chassisConfig
fabPortShow (Brocade internal use only)
xxvii