Cfgdelete - Brocade Communications Systems Brocade 8/12c Command Reference Manual

cfgDelete

Deletes a zone configuration.
SYNOPSIS
cfgdelete "cfgName"
DESCRIPTION
Use this command to delete a zone configuration.
This command changes the Defined Configuration (see cfgShow). For the change to become effective,
enable the configuration with the cfgEnable command. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory with the cfgSave command.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
OPERANDS
The following operand is required:
"cfgName"
EXAMPLES
To delete a zone configuration:
SEE ALSO
cfgAdd, cfgClear, cfgCreate, cfgDisable, cfgEnable, cfgRemove, cfgSave,
Fabric OS Command Reference
53-1001764-01
Specify a name for the zone configuration to be deleted. The name must be
enclosed in double quotation marks.
switch:admin> cfgdelete "USA_cfg"
22
cfgDelete
cfgShow
97