Smart Card Driver Installation - Brocade Communications Systems Brocade 8/12c Installation Manual

Smart Card driver installation

6. Click Next on the Server Configuration screen.
7. (SAN with SMI Agent) Click Next on the SMI Agent Configuration screen.
8. Verify your configuration information on the Server Configuration Summary screen and click Next.
9. Click Finish on the Start Server screen.
10. Click Yes on the restart server confirmation message.
11. Enter your user name and password.
The defaults are Administrator and password, respectively.
12. Click Login.
13. Click OK on the Login Banner.
Smart Card driver installation
Windows operating systems do not require smart card drivers to be installed separately; the driver is bundled with
the operating system. However, you must install a smart card driver for the Linux operating systems. You must install
both the special USB Chip/Smart Card Interface Device (USB CCID) and the PC/SC IFD driver. You can download the
source code and compile it from one of the following websites:
•
USB CCID (ccid-1.3.7.tar.bz2)
Open Source URL: http://pcsclite.alioth.debian.org/ccid.html.
•
Muscle PC/SC IFD Driver (pcsc-lite-1.4.101.tar.gz)
Open Source URL: https://alioth.debian.org/frs/?group id=30105.
The Encryption Manager Client within Network Advisor provides the binary code on both platforms for installation.
You must uncompress or untar the file depending on the platform. The procedures for the local client and the remote
client configurations follow. The thirdparty/pscs-lite-1.4.101-linux-x86.tar.gz file can be found on the Network Advisor
DVD.
Installing the Smart Card driver on the local client
1. Verify that the /opt directory exists.
If the /opt directory does not exist, create an /opt directory. If you want to install the driver in a different
directory, create that directory. Otherwise, skip this step.
> su
> mkdir /opt
2. Copy the appropriate pscs file for your platform (Linux) from the DVD and rename the file as
pcsc-lite-1.4.101-linux-x86.tar.gz file.
3. Log in as the superuser to untar the pcsc-lite-1.4.101-linux-x86.tar.gz file.
> su
> cd /opt
> gunzip pcsc-lite-1.4.101-linux-x86.tar.gz
> tar -xvf pcsc-lite-1.4.101-linux-x86.tar
After the pcsc_lite_1.4.101.tar file is extracted, the necessary binary, library, and smart card drivers are stored
in the /opt/pcsc directory.
42 of 47 Brocade Network Advisor Installation Guide
53-1002320-01