Switch Agent Configuration Group - Brocade Communications Systems Brocade 8/12c Reference

6

Switch agent configuration group

Object and OID
swVfId
1.3.6.1.4.1.1588.2.1.1.1
.2.15
swVfName
1.3.6.1.4.1.1588.2.1.1.1
.2.16

Switch agent configuration group

Object and OID
swAgtCfg
1.3.6.1.4.1.1588.2.1.1.1
.4
swAgtCmtyTable
1.3.6.1.4.1.1588.2.1.1.1
.4.11
swAgtCmtyEntry
1.3.6.1.4.1.1588.2.1.1.1
.4.11.1
swAgtCmtyIdx
1.3.6.1.4.1.1588.2.1.1.1
.4.11.1.1
swAgtCmtyStr
1.3.6.1.4.1.1588.2.1.1.1
.4.11.1.2
148
Access Description
Read only The virtual Fabric ID of the switch.
Read only This represents the virtual switch name configured in the switch.
Access Description
Not The OID sub-tree for switch agent configuration group.
accessible
Not A table that contains, one entry for each community, the access control
accessible and parameters of the community.
The table displays all of the community strings (read and write) if it is
accessed by the "write" community string. Only "read" community
strings are displayed if it is accessed by the "read" community string.
In Secure Fabric OS, the community strings can only be modified on the
primary switch.
NOTE: This table is deprecated in Fabric OS v7.0. Use the tables
snmpTargetAddrTable, snmpTargetParamsTable,
snmpCommunityTable to get the required data.
Not An entry containing the community parameters.
accessible
Read only The SNMPv1 community entry.
The return value for this entry is 1 through 6.
Read-write This is a community string supported by the agent. If a new value is set
successfully, it takes effect immediately.
Default values for communities are as follows:
•
1 (Secret Code)
•
2 (OrigEquipMfr)
•
3 (private)
•
4 (public)
•
5 (common)
•
6 (FibreChannel)
Community strings 1-3 are read-write and strings 4-6 are read only.
You can change the community setting using the snmpconfig command.
Fabric OS MIB Reference
53-1002151-01