Chapter 19, Zoning; Chapter 26, Troubleshooting; Chapter 27, Performance Data - Brocade Communications Systems Brocade 8/12c Documentation Update

3

Chapter 19, Zoning

Chapter 19, Zoning

In the section "Zone database size," on page 573, change the supported maximum zone database
size to 2 MB.

Chapter 26, Troubleshooting

In the section "Configuring IP ping," on page 748, change the second notes as follows:
NOTE
IP Perf is not supported on the Fabric OS 8 Gbps Extension Switch or Blade.

Chapter 27, Performance Data

In the section "SAN performance measures," on page 768, add the following note:
NOTE
Devices with 10GE ports must have the rmon MIB enabled on the switch. For more information
about the rmon collection command, refer to the Fabric OS Converged Enhanced Ethernet
Command Reference.
In the section "Generating a real-time performance graph," on page 775, add the following note to
step 3:
NOTE
Devices with 10GE ports must have the rmon MIB enabled on the switch. For more information
about the rmon collection command, refer to the Fabric OS Converged Enhanced Ethernet
Command Reference.
In the section "Filtering real-time performance data," on page 776, add the following note to step 3:
NOTE
Devices with 10GE ports must have the rmon MIB enabled on the switch. For more information
about the rmon collection command, refer to the Fabric OS Converged Enhanced Ethernet
Command Reference.
In the section "Enabling historical performance collection for selected fabrics," on page 779, add
the following note to step 2:
NOTE
Devices with 10GE ports must have the rmon MIB enabled on the switch. For more information
about the rmon collection command, refer to the Fabric OS Converged Enhanced Ethernet
Command Reference.
10 Brocade Network Advisor Documentation Updates
53-1002363-02