Downloading New Switch Software; Hp Customer Support Services - HP ProCurve 6120G/XG Installation And Getting Started Manual

Downloading New Switch Software

Recovering...
pass CRC check (len=7641083)
, Erasing 59 segments..., Programming starting at 0xf8000000...
programming successful...
Ready for code execution.
Decompressing...done.
Answer the following questions:
Switch startup, use Debugger (y or n)? N
initializing..initialization done.
Hit enter to Continue.
At this point the primary image contains the original factory default image that should be used to load
a current valid firmware only. The recovery procedure will automatically boot to this image. Immediately
load a current firmware image and boot to that image before restoring the switch to operation!
Downloading New Switch Software
When product enhancements occur for the switch, new software can be downloaded to the
switch through several methods, for product enhancements and new features. For more
information, see the Management and Configuration Guide for the Series 6120 Switches,
which is on the HP Web site at www.hp.com/go/bladesystem/documentation.
The new switch software would be available on the HP Web site at www.hp.com/, under
"Support and Drivers". Enter the product name (for example, 6210G/XG) in the text box and
click "Go".

HP Customer Support Services

If you are still having trouble with your switch, Hewlett-Packard offers support 24 hours a day,
seven days a week through the use of a number of automated electronic services. See the
Customer Support/Warranty booklet that came with your switch for information on how to
use these services to get technical support. The HP Web site at
provides up-to-date support information.
Additionally, your HP authorized reseller can provide you with assistance, both with services
that they offer and with services offered by HP.
34
-- Download for this Product, proceeding --
www.hp.com/#support also