European Community - HP ProCurve 6120G/XG Installation And Getting Started Manual

European Community

Supplier's Name:
Supplier's Address:
declares, that the product
Product Name and Model:
Regulatory Model Number:
Product Options:
conforms to the following Product Specifications and Regulations:
EMC: Class A
EN 55022:2006
EN 55024:1998 +A1:2001 +A2:2003
Safety:
EN 60950-1:2001 +A11:2004
IEC 60950-1:2001
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive
2004/108/EC, and carries the CE-marking accordingly.
Additional Information:
1) This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The
Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number
should not be confused with the marketing name or the product numbers.
2) This product was tested in a typical HP environment in conjunction with an HP host system.
Houston, TX
4/14/2009
Local contact for regulatory topics only:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
U.S.: Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Hewlett-Packard Company
11445 Compaq Center Drive West, Houston, TX 77070 USA
2)
HP 1/10 Gb Virtual Connect Ethernet Module
for c-Class Blade Systems / HP ProCurve 6120G/XG Blade Switch
1) HSTNS-BC13-N
All
Steve Ortmann, Manager
Houston Product Compliance Center
DoC #: HSTNS-BC13-N-R2
www.hp.com/go/certificates