ProCurve(config)# show port-access authenticator config
Port Access Authenticator Configuration
Port-access authenticator activated [No] : Yes
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
| Re-auth Access
Port | Period
---- + ------- -------- ----- ------- -------- ---------- -------- -----
1
| No
2
| No
...
Figure 10-11.Example of show port-access authenticator config Command
Figure 10-10.Example of show port-access authenticator Command
The information displayed with the show port-access authenticator command
for individual (config | statistics | session-counters | vlan | clients) options is
described below.
Syntax: show port-access authenticator config [port-list]
Displays 802.1X port-access authenticator configuration
settings, including:
• Whether port-access authentication is enabled
• Whether RADIUS-assigned dynamic VLANs are supported
• 802.1X configuration of ports that are enabled as 802.1X
authenticators (For a description of each setting, refer to
the syntax descriptions in "2. Reconfigure Settings for
Port-Access" on page 10-21. Use the show running
command to view the current client-limit configuration
available for switches.)
You can display 802.1X port-access authenticator
configuration for all switch ports or specified ports.
802.1X configuration information for ports that are not
enabled as 802.1X authenticators is not displayed.
Max
Quiet
Control
Reqs
Period
Auto
2
60
Auto
2
60
Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
TX
Supplicant Server
Timeout
Timeout
30
30
30
30
Cntrl
Timeout
Dir
30
both
30
in
10-53