HP ProCurve Switch 6120G/XG Manual page 187

RADIUS Authentication, Authorization, and Accounting
Configuring the Switch for RADIUS Authentication
Figure 5-7. Listings of Global RADIUS Parameters Configured In Figure 5-6
5-20
Note: The Webui access task
shown in this figure is available
only on the switches covered in
this guide.
After two attempts failing due to
username or password entry
errors, the switch will terminate
the session.
Global RADIUS parameters
from figure 5-6.
Server-specific encryption key
for the RADIUS server that will
not use the global encryption
key.
These two servers will use the
global encryption key.