Introduction - HP ProCurve Switch 6120G/XG Management Manual

Hp procurve series 6120 blade switches advanced traffic management guide
Hide thumbs Also See for ProCurve Switch 6120G/XG:
Table of Contents

Advertisement

Introduction

QoS Feature
IP Type-of-Service Priority
Source-Port Priority
DSCP Policy Table
Queue Configuration
As the term suggests, network policy refers to the network-wide controls you
can implement to:
Ensure uniform and efficient traffic handling throughout your network,
while keeping the most important traffic moving at an acceptable speed,
regardless of current bandwidth usage.
Exercise control over the priority settings of inbound traffic arriving in
and travelling through your network.
Adding bandwidth is often a good idea, but it is not always feasible and does
not completely eliminate the potential for network congestion. There will
always be points in the network where multiple traffic streams merge or where
network links will change speed and capacity. The impact and number of these
congestion points will increase over time as more applications and devices
are added to the network.
When (not if) network congestion occurs, it is important to move traffic on
the basis of relative importance. However, without Quality of Service (QoS)
prioritization, less important traffic can consume network bandwidth and
slow down or halt the delivery of more important traffic. That is, without QoS,
most traffic received by the switch is forwarded with the same priority it had
upon entering the switch. In many cases, such traffic is "normal" priority and
competes for bandwidth with all other normal-priority traffic, regardless of
its relative importance to your organization's mission.
This section gives an overview of QoS operation and benefits, and describes
how to configure QoS in the console interface.
Quality of Service is a general term for classifying and prioritizing traffic
throughout a network. That is, QoS enables you to establish an end-to-end
traffic priority policy to improve control and throughput of important data.
You can manage available bandwidth so that the most important traffic goes
first. For example, you can use Quality of Service to:
Quality of Service (QoS): Managing Bandwidth More Effectively
Default
Disabled
Disabled
Various
4 Queues

Introduction

Page
Reference
page 5-15
page 5-27
page 5-33
page 5-40
5-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve switch 6120xgProcurve 6120 series

Table of Contents