Tasks For Your First Procurve Web Browser Interface Session; Viewing The "First Time Install" Window - HP ProCurve 6120G/XG Configuration Manual

Using the ProCurve Web Browser Interface

Tasks for Your First ProCurve Web Browser Interface Session

Tasks for Your First ProCurve Web
Browser Interface Session
The first time you access the web browser interface, there are three tasks you
should perform:
■
■
■

Viewing the "First Time Install" Window

When you access the switch's web browser interface for the first time, the
Alert log contains a "First Time Install" alert, as shown in figure 5-2. This gives
you information about first time installations, and provides an immediate
opportunity to set passwords for security and to specify a Fault Detection
policy, which determines the types of messages that will be displayed in the
Alert Log.
Double click on First Time Install in the Alert log (figure 5-1 on page 5-7). The
web browser interface then displays the "First Time Install" window, below.
Figure 5-2. First-Time Install Window
5-8
Review the "First Time Install" window
Set Manager and Operator passwords
Set access to the web browser interface online help