■
■
■
■
■
■
■
■
■
■
Figure C-17 shows sample output from the show tech command.
ProCurve 6120 Blade Switch# show tech
show system
Status and Counters - General System Information
System Name
System Contact
System Location
MAC Age Time (sec) : 300
Time Zone
Daylight Time Rule : None
Software revision
ROM Version
Up Time
CPU Util (%)
IP Mgmt
- Pkts Rx : 3980
Pkts Tx : 62
Figure C-17. Example of Show Tech Command
To specify the data displayed by the show tech command, use the copy show
tech command as described in "Customizing show tech Command Output" on
page C-67.
Image stamp (software version data)
Running configuration
Event Log listing
Boot History
Port settings
Status and counters — port status
IP routes
Status and counters — VLAN information
GVRP support
Load balancing (trunk and LACP)
: ProCurve 6120 Blade Switch
:
:
: 0
: Z.14.04
: Z.14.03
: 2 hours
: 23
Viewing Switch Configuration and Operation
Base MAC Addr
Serial Number
Memory
- Total
Free
Packet
- Total
Buffers
Free
Lowest
Missed
Troubleshooting
: 002481-b00921
: TW28080080
: 33,554,432
: 21,562,672
: 3022
: 2899
: 2748
: 0
C-65