Mirroring Configuration
Table B-1 shows the different types of mirroring that you can configure using
the CLI, Menu, and SNMP interfaces.
Table B-1. Mirroring Configuration Options
Monitoring
Traffic Selection
Interface and
Criteria
Configuration
Level
Port(s)
All traffic
Trunk(s)
Classifier-based
policy (IPv4 or IPv6
traffic)
Switch
MAC source/
(global)
destination
address
1
Configures only session 1, and only for local mirroring.
Monitoring and Analyzing Switch Operation
Traffic Direction
CLI Config
Menu and Web
I/F Config
Inbound only
All traffic
Outbound only
(inbound and
Both directions
outbound
combined)
Inbound only
Not available
Inbound only
Not available
Outbound only
Both directions
Traffic Mirroring
SNMP Config
1
Inbound only
Outbound only
Both directions
Not available
Inbound only
Outbound only
Both directions
B-27