HP ProCurve 6120G/XG Configuration Manual page 382

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
In the following example, the show snmp-server command output shows that
the switch has been configured to send SNMP traps and notifications to
management stations that belong to the "public", "red-team", and "blue-team"
communities.
ProCurve(config)# show snmp-server
SNMP Communities
Community Name
---------------- -------- ------------
public
blue-team
red-team
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
Trap Category
------------------------------
SNMP Authentication
Password change
Login failures
Port-Security
Authorization Server Contact
ARP Protection
DHCP Snooping
Address
---------------
10.28.227.200
10.28.227.105
10.28.227.120
...
Figure 13-12. Display of SNMP Notification Configuration
13-34
MIB View Write Access
Operator Restricted
Manager Unrestricted
Manager Unrestricted
Current Trap Configuration
--------------------------
extended
enabled
enabled
enabled
enabled
enabled
enabled
Community Events Sent
---------- -----------
public All
red-team Critical
blue-team Not-INFO
SNMP Community
configuration
Link-change
trap setting
Network security
notification
Notify Type Retry
----------- -----
trap 3
trap 3
trap 3
Timeout
-------
15
15
15